Methods of Warping Processing (Part Three)

The quality of the warp axis during warping processing will directly affect the production efficiency of subsequent processes and the quality of the final fabric. Therefore, the technical requirements for the warping process are: 1. The entire warp yarn is evenly arranged, with small tension differences. The winding density of the warp shaft is uniform and consistent in the left, middle, right, inside and outside, and the unwinding is smooth. 2. The warp tension is appropriate to maintain the strength, elongation, and elasticity of the warp yarn. 3. The number of warp pieces, warp length, and yarn arrangement are correct. 4. Reduce the breakage of the entire warp to avoid entanglement of the breakage.

Modern warping equipment is gradually developing towards high speed, large winding, wide width, high automation, and intelligence. It can achieve functions such as constant linear speed winding of the warp axis, full axis self stop, and automatic drop axis, and can also measure product quality and process parameters online. The high-speed warping machine can run at a speed of 1100 meters per minute, with a diameter of 1250 millimeters on the warp shaft and disc. The width of the warping machine can reach 2.4 meters or even 2.8 meters. The high-performance creel frame with single collective tube changing improves the uniformity of yarn tension.

As the textile develops in the direction of small quantity, diverse kind and prompt delivery, Anytester has developed related warping machines on the increasing requirements on product samples. For more details of these machines, please refer to our website www.anytester.com