Knit consistent fabric samples from POY, DTY and FDY filaments of 25–1000 dtex. With an intuitive touch screen, adjustable 10–300 rpm speed and automatic knitted-fabric tension control, the AT250F-III is the ideal dyeing-test partner for knitting mills, filament producers and textile laboratories.
Request a QuoteBefore a filament yarn lot goes into bulk dyeing or garment production, its quality must be verified. Evenness defects, dye-uptake differences and affinity variations are invisible on the yarn package — they only appear on knitted fabric. The AT250F series was engineered exactly for this job.
The AT250F Series Lab Knitting Machine is specially designed to knit fabric samples of POY, DTY or FDY for the assessment of yarn uniformity and dyeing affinity. It handles various filaments from 25 dtex up to 1000 dtex (up to 1200 dtex with the 96-needle cylinder), making it ideal equipment for dyeing tests in knitting factories, chemical fiber plants, quality-inspection institutes and textile R&D laboratories.
Among the three models, the AT250F-III stands out as the flagship: a modern touch screen display replaces conventional buttons, the running speed is freely adjustable from 10 to 300 rpm, and a compact single-phase AC220V design fits easily into any laboratory layout.
Mount the filament package, select the needle cylinder matching your yarn fineness, set the speed on the touch screen, and the machine knits a uniform tubular fabric sample under automatic tension. The sample is then dyed and evaluated for levelness, barré, stripiness and dye affinity — giving you objective data before committing an entire yarn lot to production.
Every detail of the AT250F-III is built around one goal: repeatable, reliable sample knitting that laboratories can trust.
A clear, responsive touch screen replaces mechanical buttons. Speed setting, status monitoring and operation are all managed on one intuitive interface.
Fine-tune the knitting speed to suit delicate fine-dtex filaments or heavy coarse yarns — far beyond the fixed 180 rpm of entry-level models.
The automatic knitted-fabric tension device keeps every course of the sample under consistent tension, eliminating density variation between samples.
The standard 240-needle cylinder (Ø89 mm / 3.5") covers most yarns; optional cylinders from 96 to 300 needles match every fineness from 25 to 1200 dtex.
A rigid frame, precision needle cylinder and proven drive system deliver years of trouble-free daily operation in busy QC laboratories.
Runs on standard AC220V 50Hz single-phase power — no industrial three-phase wiring required, so installation takes minutes in any lab.
One machine, many quality-control scenarios across the man-made fiber and knitting industry.
Knit and dye small samples of incoming POY, DTY or FDY lots to verify dyeing affinity and detect barré or stripiness before the yarn reaches production knitting machines.
Evaluate yarn uniformity lot by lot, compare spinning processes, and generate fabric samples for customer approval and shipment inspection.
Produce standardized knitted specimens for colorfastness, dye-uptake and appearance-assessment tests, with repeatable sample quality across operators and days.
Compare the three models of the AT250F series — the touch screen AT250F-III is the recommended choice for modern laboratories.
| Model | AT250F-I | AT250F-II | AT250F-III (Touch Screen) |
|---|---|---|---|
| Needle cylinder diameter | Ø89 mm (3.5 inch) | ||
| Number of feeders | 1 | ||
| Number of needles | 96–300 N (standard cylinder: 240 needles) | ||
| Running speed | 180 r/min (fixed) | 10–300 r/min, adjustable | 10–300 r/min, adjustable |
| Display mode | LED display | LED display | Touch screen |
| Applicable filament | POY (customized), DTY, FDY | ||
| Applicable filament fineness | 25–1000 dtex (up to 1200 dtex with 96-needle cylinder) | ||
| Power supply | AC380V 50Hz, three-phase | AC220V 50Hz, single-phase | AC220V 50Hz, single-phase |
| Dimensions (L×W×H) | 720×360×1450 mm | 720×490×1450 mm | 360×560×1500 mm |
| Weight | 80 kg | 85 kg | |
| Filament fineness (dtex) | 25–40 | 35–65 | 50–100 | 75–150 | 150–350 | 300–350 | 350–1000 | 1000–1200 |
|---|---|---|---|---|---|---|---|---|
| Number of needles | 300 | 280 | 260 | 240 | 176 | 144 | 120 | 96 |
Note: The standard needle cylinder has 240 needles. If you need another needle cylinder, please inform us before ordering. Standard configuration: main machine ×1, 240-needle cylinder (mounted) ×1, packing list, quality certificate and user manual. Optional: knitting needles, sinkers.
Answers to the questions we hear most often from knitting mills, filament producers and testing laboratories.
Get a quotation, detailed datasheet or a live video demonstration of the AT250F-III touch screen lab knitting machine. Our engineers reply within 24 hours.
Email Us Now