NEWS CENTER
Home » News

CONTACT US

Mob:   +86-188 55105986
Fax:    +86-551 69012300
Email:  marketing@anytester.com
Address: No. 8, Cuiwei Road, Hefei City, Anhui Province, P.R.C

AT235 Lab Wet Spinning Machine

The articles shown below are all about the AT235 Lab Wet Spinning Machine, through these related articles, you can get relevant information, notes in use, or latest trends about the AT235 Lab Wet Spinning Machine. We hope these news will give you the help you need. And if these AT235 Lab Wet Spinning Machine articles can't solve your needs, you can contact us for relevant information.
  • Tprinciple of wet spinning process-Part 5 Dissolution of Polymer

    Dissolution of polymerCharacteristics and thermodynamic interpretation of the dissolution process(1)Characteristics of polymer dissolution processThe dissolution process of polymer is the process of polymer macromolecules under the action of solvent molecules, so that the interaction between macromo

    12-18-2021
  • Tprinciple of wet spinning process-Part 4 Defference Wet Spinning From Welt Spinning

    Spinning waysWelt spinningWet spinningCompositiong of spinning systemunitary(high polymer)Binary(dry)high polymer+soventbinary(wet)high polymer+sovent+sedimentSolidification process theoryHeat transrferHeat transfer、mass transfer、diffusion、 phase separation heat Spinning speedHundreds to thousands p

    11-22-2021
  • Tprinciple of wet spinning process-Part 3 Wet Spinning Process

    Wet spinning process The spinning solution by mixing、filtering and defoaming after spining preparing ,send to the spinning machine. After computing by spinning pump,passing by candle filter gooseneck goes into the spineret.Solution from spineret pores to coagulation fluid. The solvent in the solut

    11-22-2021
  • Tprinciple of wet spinning process-Part 2 Preparation of spinning solution and preparation before spinning

    Spinning solutions are prepared in two ways for solution spinning. One-step method:polymer is used to spin directly.It is why this is called one stop method.But it must use  homogeneous polymerization.Only wax nylon can be used in one step. Two-step method:First, the solution obtained by polymerization is separated into granular or powdery fiber forming polymer.After,The solution is dissolved into spinning solution.This method is called the two-step method.

    11-12-2021

PRODUCTS CATALOGUES

Textile & Garment Tester

Door & Window Hardware Tester

NAVIGATION

Home

CONTACT US

 Tel:         +86 188 55105986
 Fax:       +86-551-69012300
 Email:    marketing@anytester.com
 Address: No. 8, Cuiwei Road, Hefei City, Anhui Province, P.R.C

FOLLOW US

ONLINE CHAT

Copyright   2017 Anytester (Hefei) Co., Ltd. All rights reserved. Site Map | XML