PRODUCTS
Home » Products » Rubber & Plastic Tester » Plastic Pipe &Fittings Tester » HY0871 Ignition Temperature Tester for Plastic Material

PRODUCTS CATALOGS

loading

Share to:

HY0871 Ignition Temperature Tester for Plastic Material

HY0871 Ignition temperature tester is used to test the combustion and flame retardant properties of plastic materials. In the heating chamber of a hot air furnace, the samples are heated at different temperatures and the escaping gas is ignited directly by a small flame in the opening above the furnace to determine the flashover temperature. The auto-ignition temperature is determined in the same way as the flash-over temperature, but no flame is applied.
  • HY0871

  • Anytester

Availability:

Product Description

HY0871 Ignition temperature tester is used to test the combustion and flame retardant properties of plastic materials. In the heating chamber of a hot air furnace, the samples are heated at different temperatures and the escaping gas is ignited directly by a small flame in the opening above the furnace to determine the flashover temperature. The auto-ignition temperature is determined in the same way as the flash-over temperature, but no flame is applied.


Standards

ISO 871

GB 4610



Technical Specification

Model

HY0871

Furnace tube

inner diameter 100mm±5mm, length 240mm±20mm

Made of custom ceramic tubes with a temperature resistance of not less than 750°C

 Inner ceramic tube

Capable of withstanding at least 750,  inner diameter 75mm±2mm, length 240mm±20mm

The temperature in the furnace

 Can be constant at any temperature between (150-750)

Time range

0999.9S, settable

Flame height

10mm to 20mm, adjustable

Thermocouples 

3 thermocouples and temperature meters to detect the temperature in the furnace and the temperature of the sample

Temperature control accuracy

 ±2℃

Display accuracy

 ±0.5℃

Test furnace size

400×250×300mm

Controller size

430×350×280mm

Power supply

AC220V±10%, 50Hz

Power

2500W

Weight

15kg


Previous: 
Next: