AT232B Batch-type Low Temperature Carbide Furnace consists of pre-heating tube, working furnace tube, steam generator and flow controlling system.
AT232B
Anytester
Availability: | |
---|---|
Product Description
AT232B Batch-type Low Temperature Carbide Furnace consists of pre-heating tube, working furnace tube, steam generator and flow controlling system. The pre-heating tube has two heating sections and the working furnace tube has three heating sections. Pre-heat steam produced by steam generator, air or oxygen to 600℃ in the pre-heating tube and then enters into the working heating furnace tube through pressure-adjusting valve and flowmeter. The pre-heat tube is connected with the working furnace tube by a rapid-connection connector and they are horizontally laid in rank. The heating furnace for the working furnace tube is open-able and dischargeable, convenient to observe. There is stainless steel filtering screen in the pre-heating tube for uniformly heating gas.
Feature
« Two-furnace structure;
« Sheet metal bracket with electrostatic spraying plastics;
« Heat-resistant stainless steel pre-heating tube and quartz stopper;
« Mollite fiber open-able heating furnace and tube heating furnace;
« Steam generator with the flow-meter to control pressure.
Technical Specification
Model | AT232B |
Temperature range of outlet air from pre-heating tube | 500~600℃,adjustable |
Max. temperature of constant temperature zone | 1200℃ |
Temperature controlling accuracy | 0.5% |
Temperature controlling mode | Intelligent controller |
Heat mode | 2-section tube heating tube for pre-heating tube 3-section open-able resistance furnace |
Size of working furnace | ¢89*1500mm |
Size of pre-heating furnace | ¢89*1200mm |
Connector | ¢40 stainless steel corrugated pipe |
Steam source | Steam generator with flowmeter to control pressure |