HY4530
Anytester
Availability: | |
---|---|
Description
It combined the thermogravimetric analysis TG with differential thermal analysis DTA or differential scanning calorimetry DSC, and TG and DTA or DSC are obtained by the same sample in the same measurement.
Features
★ Furnace heating using precious metal nickel-cadmium alloy wire double-winding system to reduce interference, more high temperature;
★ Tray sensor, the use of precious metal nickel-cadmium alloy Seiko to create, with high temperature, oxidation resistance, corrosion resistance and so on;
★ Power supply, the cooling part of the cooling, and the host separately to reduce the heat and vibration on the micro-heat balance;
★ The use of open-lid structure, easy to operate. It is difficult to operate the sample on the furnace and cause the sample rod to be damaged;
★ The host of the use of water temperature device to isolate the heating furnace on the chassis and micro-heat balance of heat;
★ According to customer requirements to customize the furnace;
★ Using imported 32bit ARM processor Cortex-M3 core, sampling speed, processing faster;
Technical Specification
Model | HY4530 |
DSC range | ±lmW~±500mW |
DSC accuracy | ±0.1μW |
Temp range | R.T ~ 1350℃ |
Heating rate | 0.1 ~ 100℃/min |
Temperature resolution | 0.1℃ |
Temperature fluctuation | ±0.1℃ |
Constant temperature time | 0-300min |
Cooling time | 15min (1000 ℃ ~ 100 ℃) |
Balance capacity | 1mg ~ 2g (5g optional) |
DTA range | ±10μV- ±2000μV |
Data interface | Standard USB interface |
Power supply | 220V, 50Hz |
Standard Configuration
No. | Item | Quantity |
1. | Main machine | 1set |
2. | Crucible | 1pc |
3. | Packing list | 1pc |
4. | Quality certificate | 1pc |
5. | User manual | 1pc |
Standards
EN ISO 11358 12989-2 11358 | ASTM D2288 6375 6382 | IEC 60881-4-1 |
Note: this Synchronous Thermal Analyzer can conform to but not limit to all the standards above, for more standards conformance, please contact us.