PRODUCTS
Home » Products » Rubber & Plastic Tester » Plastic Pipe &Fittings Tester » AT475 Leaktightness Tester for Piping System Joint

PRODUCTS CATALOGS

loading

Share to:

AT475 Leaktightness Tester for Piping System Joint

AT475 Leaktightness Tester for Piping System Joint is used to test the leaktightness/sealability for elastomeric-sealing-ring-type socket joints which use match with PVC, polyethylene, polypropylene and other plastic pipes.
  • AT475

  • Anytester

Availability:

Application

AT476 Pipes & Fittings Pull-out Resistance Tester is used to determine the resistance to pull-out of pipes and fittings under a constant load.


Standards

AT475-Leaktightness-Tester-for-Piping-System-Joint-1.jpg


Note: For more standards, please contact us!


Features

★ Experimental data can be stored in the U disk, can store many data, data files can be opened with office software;

★ Hydraulic pipe radial deformation device, digital display size deformation monitoring, and dynamic zero automatically, the operator of the thick-walled pipe pressure, easy effort;

★ Industrial color touch screen, 0-0.08Mpa arbitrarily set test pressure, programmable pressure control, you can easily detect the data, but also provide a rich time pressure curve;

★ Different specifications of the pipe with the corresponding block, so that the operation more simple and clear;

★ Deflection angle for the up and down about four directions arbitrary deflection;

★ In order to facilitate the installation of larger diameter sample, the specimen clamping device to take the upper cover to open the structure;


AT475-Leaktightness-Tester-for-Piping-System-Joint-2.jpg



Technical Specification

AT475-Leaktightness-Tester-for-Piping-System-Joint-3.jpg

Standard Configuration

AT475-Leaktightness-Tester-for-Piping-System-Joint-4.jpg

Previous: 
Next: